ALTERA FPGA EP2C8Q208C8N development board avec USB Blaster+TFT LCD 2.4+USB-TTL

Déscription:

FPGA          :EP2C8Q208C8N
SDRAM         : 256M BIT /or 36M byte
CFI_FLASH     : 64M BIT / or 8M  byte
SRAM           :256K X 16 /or 4M BIT
EPCS           :M25P16 (Configure FPGA)
CLK_INPUT:50MHZ, and 7 user clk input
a reconfigurable button (not programmable)

Peripheral I / O resources:
(1.) on-board 6-bit LED light-emitting diode (do water and other experiments)
(2.) on-board 8-bit LED digital tube (for dynamic or static display experiment of digital control, frequency meter; stopwatch .. ..)
(3.) on-board all the way to the buzzer (for sound experimental)
(4.) onboard 4 independent keys (buttons do control experiments)
(5.) onboard I2C serial EEPROM 24C04 (IIC bus to do experiments)
(6.) on-board VGA port  (doing experiments VGA)
(7.) dedicated MAX232 serial communication circuit board (and other systems to do the serial communication experiment)
(8.) board 1602LCD character LCD interface (do characters show experimental)
(9.) board 12864LCD LCD interface (such as Chinese characters do show experimental)
(10.) on-board dual PS / 2 keyboard port (do PS / 2 keyboard test)
(11.) on-board SD card interface.
(12.) Board DS1302 clock chip.
(13.) DS18B20 onboard temperature sensor.
(14.) on-board infrared receiver. IR
(15.) on-board stepper motor driver interface. ULN2003
(16.) Onboard a AD can learn the principles of TLC549
(17.) Onboard a DA can learn the principles of ADC0832

Package list:

1 X FPGA  Board    
1 X USB Blaster downloader      
1 x power adapt DC-5V    
1 X IR Control    
1 X USB to TTL (RX/TX)    
1 X TFT LCD 2.4 / 320 X 240    
2 X Acrylic plate    
12 X pillars